RJ45 with a transformer is a kind of conductor (line) with the appropriate matching components, the circuit is connected and disconnected from the mechanical and electrical components. In order to ensure the normal operation of the connector, it is very important to check the security of the connector in a certain period:

(1) to view the RJ45 with transformer, switch to burning must be in the closed state, or because of current self or short-circuit and burn the electrical components.

(2) to remove wire connectors, to carefully observe the connection method for adapter; first in order to loosen the locking spring lock or press the connector apart, do not drag. When loaded, it should be in the opposite way to plug in and lock the connector.

(3) RJ45 some type of waterproof wire with transformer remove detection, should pay attention to careful take leather, avoid leather rotten, and affect the waterproof effect; in the re assembly, must be waterproof suit in place. Otherwise, perhaps due to the water into the connector and the circuit fault.

(4) in the use of the RJ45 with a table to see the transformer, when the bar is inserted into the metal terminal is not too large, in order to prevent its deformation caused by contact.