1.rj45 connector: check the wire cutting specifications are correct; size is in accordance with the requirements; the incision must be flush, do not scratch the wire, wire spotless etc..

2.rj45 connector peeling skin: check the peeling mouth is flat, not the core wire, such as the formation of the wire, the size is correct.

3 grouping processing: the correct size of the trim, trim is flat, not to cut into the core line.

4.rj45 connector: check whether the export stripping stripping endothelial flush; peeling is the correct size; there is no stripping wound core wire, broken wire; insulator can not fall off when half stripping.

5.rj45 connector sleeve pipe: check the size of the shrink tube, model is correct.

6 prepare: check whether the temperature of soldering tin solder is correct; prepare before the core wire wire in order, whether there is a branch, bending, discounts and other phenomena; if there is a copper head, copper wire bifurcation, uneven and scald insulation phenomenon prepared after soldering.

7: check the temperature of the solder iron is correct; do not burn insulation, tin point should be smooth, the tip of the Wuxi, not false welding, weld.

8 terminal crimping: confirmation terminal, wire specification is correct; there is no crimping bell, tilt, insulation and core wire exposed is too long or too short.

9.rj45 connector terminal insertion: check connector, terminal model is correct; the terminal has no damage, deformation and other phenomena; the terminal has no leakage, insertion, insertion is not in place and so on.

10: check the cable crimp connector type is correct; the winding direction is correct; the core line is damaged, exposed copper and scald; crimping is in place.

11 blowing pipe: the contraction of the tube is good, do not burn the insulation skin.

12 shell: the shell is assembled, installed the wrong without scratches, burr and other bad, there is no leaking parts, screw screw has no hair, oxidation, discoloration, loosening, no side anastomosis after assembly; if the shell is a direction, then it must be in accordance with the requirements of assembly.

13: check the label label content is clear and correct, no hyphenation phenomenon; the label size is correct; the label is dirty and damaged; the label is in the right position. 14 dozen tie bar: check the bar with the specifications, color, position is correct; no fracture, loosening phenomenon.

15: check whether the dirty injection molding mold, molding parts of any material shortage, bubbles, bad adhesion, poor hardening etc..

16 RJ45: check the plug connector plug forming molding has no damage, uneven, lack of material, flash, debris, and other bad rhyolitic metal terminal, confirmed that no deformation, damage, and other bad copper exposure.

17.rj45 connector electrical inspection: check the relevant product's inspection and guidance ticket requirements.

18 appearance check: pay attention to as long as it is to be able to see all the items to check. For example: check the product size is not consistent with the requirements; whether the wrong material, no more or less; check the wire connector, the surface without scratches, stains, burrs, deformation, gap and other bad; if missing, fixed connector shell assembling agreement is good; the label content is clear and correct the position and direction is correct; label; terminal crimping is good or not, there is no leaking plug, the plug is inserted, whether in place; cable crimping condition; heat shrinkable tube contraction is good, shrinkage position and size are correct; tie specifications, quantity, location is correct, there is no fall,